Name Tag Pinwheel
1-Cut a 3 3/4” square of fusible and one of your fabrics. (There will be less fraying with a heavy fusible.)
2-Press the fusible onto a contrasting piece of fabric
3-Peel the paper off the fusible and press the square of fabric on top
4-Trim to 3 1/2 inches
5-With a scissors or rotary cutter make a diagonal cut towards the center from both directions. DO NOT cut through the center.
6-Thread a needle with embroidery floss or thread
Come up through the backside of the pinwheel and put four of the points on the needle.
7-Drop a button on the needle and pull the thread thru.
8-Stitch back down through the hole and fabric
Tie a tight knot to snug down the button
9-Your Pinwheel can be mounted on fabric or card stock.
10-Add your name
Materials
Cutting it out
Cut a 3 3/4” square of fusible and one of your fabrics. (There will be less fraying with a heavy fusible.) Press the fusible onto a contrasting piece of fabric Peel the paper off the fusible and press the square of fabric on top
Trim to 3 1/2 inches
Cutting the lines
With a scissors or rotary cutter make a diagonal cut towards the center from both directions. DO NOT cut through the center.
Sewing the final step
Thread a needle with embroidery floss or thread
Come up through the backside of the pinwheel and put four of the points on the needle. Drop a button on the needle and pull the thread thru.
Stitch back down through the hole and fabric
Tie a tight knot to snug down the button
Just add your name and add to a background
The background can be cut as a square or round
Your Pinwheel can be mounted on fabric or card stock. Add your name
and you have a name tag for this show
Thank you Candace for the instructions